Installation of a warm floor
In the age of modern technology in all spheres of human activity, people want to increase their comfort more and more. What are the chic repairs for tens of thousands of euros, as well as huge apartments with an area of 200 square meters. This is all great, but today we will talk about another detail of comfortable housing — underfloor heating or just warm floors. Also, respectively, we will talk about their correct installation.
So, underfloor heating, what are they and how they work.
To begin with, you need to understand that floors come on an electrical basis (that is, cables, supplying heat by electricity) and water, which heats water, giving heat to the floor. It is worth mentioning an important detail! The installation of water-based floor heating in apartment buildings is not possible. Only electric floors can be installed in an apartment. In private villas the practice with "water" is possible, but not in apartment buildings.
First you should choose a place to install the thermostat. The length of the power cable is 3 meters, and the connection and end sleeves must necessarily be laid in concrete or cement-sand mixture in the same way as the heating cable.
The standard scope of delivery includes the heating section, instructions and a galvanized metal fixing strip. The heating section has 3 meters of cold cable, which is connected to the thermostat. Heating cable section should be evenly distributed over the heating area. The most common way of laying the heating cable is parallel laying of cable strands with a certain pitch. In this case, it is easy to achieve an even temperature across the entire surface of the underfloor heating. For this purpose, a mounting tape is fastened across the design direction of the heating cable with a pitch of 50 cm on the area to be heated. Fix the cable on the mounting tape, starting from the attachment of the connection sleeve. Standard delivery includes a heating section, instructions, double-sided adhesive tape on a fabric basis, a paper ruler with the marking of laying steps for 80 W/m2, 100 W/m2, 130 W/m2 and 150 W/m2, and paper labels, with which the cable is firmly fixed on the double-sided adhesive tape.
The standard scope of delivery includes the heating section, instructions and a galvanized metal fixing strip. The heating section has 3 meters of cold cable, which is connected to the thermostat. Heating cable section should be evenly distributed over the heating area. The most common way of laying the heating cable is parallel laying of cable strands with a certain pitch. In this case, it is easy to achieve an even temperature across the entire surface of the underfloor heating. For this purpose, a mounting tape is fastened across the design direction of the heating cable with a pitch of 50 cm on the area to be heated. Fix the cable on the mounting tape, starting from the attachment of the connection sleeve. Standard delivery includes a heating section, instructions, double-sided adhesive tape on a fabric basis, a paper ruler with the marking of laying steps for 80 W/m2, 100 W/m2, 130 W/m2 and 150 W/m2, and paper labels, with which the cable is firmly fixed on the double-sided adhesive tape.
The mounting tape has fasteners every 2.5 cm. To obtain a power of 130 W/m2, the cable is fastened in every fifth attachment (in 12.5 cm), for 165 W/m2 in every fourth attachment (in 10 cm), and to obtain 190 W/m2 alternate 10 cm and 7.5 cm (4th and 3rd attachments).
После всех завершенных работ по электрике, можно укладывать напольное покрытие. Установка плитки производится таким же образом, как и без нагревательного кабеля для теплого пола. Толщина слоя плиточного клея зависит от его свойств. Различие в работе состоит в соблюдении предельной осторожности, чтобы не повредить нагревательный кабель шпателем для плитки или другим инструментом. Обязательно оставляйте щели между уложенной плиткой на срок до недели не затертыми шовной замазкой. В этом случае также можно положить тонкий слой стяжки. Толщина стяжки зависит от состава смеси и может составлять 0,5 сантиметров. Минимальная высота поднятия пола достигается использованием самовыравнивающихся смесей для теплых полов.
Our company ASA Luxe group offers turnkey construction and repair services. We undertake all the work on the preparation of the object, the selection of building materials and will realize all your wishes
Contact us for a project
France
980, Avenue du Peyrat 83310 Grimaud
+33 6 22 35 19 05
+33 6 26 55 03 40
980, Avenue du Peyrat 83310 Grimaud
+33 6 22 35 19 05
+33 6 26 55 03 40
Subscribe
© 2022 ASA LUXE GROUP